Type T Oil Gun – High pressure steam or air atomized

Faber’s high pressure steam or air atomized oil guns fire light or heavy oils with both atomizing media with no combustion performance compromise. Although plant air is typically used for a cold start-up when no atomizing steam is available, it can also be used for continuous operation. Less costly steam atomization is typically used at all times when it is available. Atomization media pressure requirements at full capacity range from 75 to 125 psig.

• Heat input range 2.1 to 24 MMBTU/Hr.
• Used in our high capacity oil igniters or for waste fuel combustion

Specs:

• Heat input range 2.1 to 24 MMBTU/Hr.
• Used as warm up guns in large oil igniters, or to burn waste streams
• Steam or air atomized
• Designed for fuels with a viscosity of 200 ssu or less. Use orifice bushing P/N ob-70 for fuels with a viscosity of 35 to 50 ssu
• Optional clean out valve assembly P/N B5
• Requires atomizing differential pressure control. Approximately 15 psig differential for #2 Oil and 18 Psig differential for #6 oil